CBWLX - LR WHITE RESIN, 17411
- MSDS: CBWLX
- Manufacturer: POLYSCIENCES INC
- Product Name: LR WHITE RESIN, 17411
- National Stock Number: 8010-00N067086
Product Identification
Product ID:LR WHITE RESIN, 17411
MSDS Date:03/01/1988
FSC:8010
NIIN:00N067086
Kit Part:Y
MSDS Number: CBWLX
Responsible Party
WARRINGTON, PA 18976
US
Emergency Phone: 215-343-6484
Info Phone: 215-343-6484
Cage: 9C365
Contractor
Telephone: 215-313-6484
Cage: 9C365
Ingredients
POLYHYDROXY SUBSTITUTED BISPHENOL A DIMETHACRYLATE RESIN
OSHA PEL N/K
ACGIH TLV: N/K
BENZOYL PEROXIDE (SARA 313)
CAS: 94-36-0
RTECS: DM8575000
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT ESTABLISHED, BUT SIMILAR COMPOUNDS
ARE IRRITANTS AND MAY BE HARMFUL BY INHALATION, INGESTION OR SKIN
ABSORPTION. ACUTE:CAUSES EYE AND SKIN IRRITATION. MAY BE HARMFUL TO
UPPER RESPIRATORY TRACT. CH RONIC:NONE LISTED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . EYES:IMMED FLUSH W/COPIOUS AMTS
OF WATER FOR @ LEAST 15 MINUTES. SKIN:IMMED FLUSH W/SOAP & COPIOUS
WATER. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG GIVE ARTF RESP. IF
DFCLTY IN BRTHG, GIVE OXYG. CALL A PHYS.
Fire Fighting
Flash Point:248F,120C
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER,
ALCOHOL, OR POLYMER FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:IF EXCESS LR WHITE ACCELERATOR IS ADDED
TO LR WHITE RESIN, AND THE CONTAINER HOLDING THE MOISTURE IS NOT
VENTED, THERE IS A RISK OF EXPLOSION.
Accidental Release
Spill Release Procedures:VENTILATED AREA AND WASH SPILL SITE AFTER
MATERIAL PICKUP IS COMPLETE. SWEEP UP, PLACE IN A BAG AND HOLD FOR
WASTE DISPOSAL. AVOID RAISING DUST. WEAR NIOSH/MSHA APPRVD SCBA,
RUBBER BOOTS, AND HEAVY RU BBER GLOVES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT. DO NOT GET IN EYES, ON
SKIN, OR ON CLOTHING. KEEP TIGHTLY CLOSED. USE WITH ADEQUATE
VENTILATION. STORE IN A COOL DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL (GENERAL):REQUIRED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WASTE DISP METH:WITH NON-TOXIC WASTE. DISPOSAL MUST BE I/A/W FEDERAL,
STATE AND LOCAL REGULATIONS .
Chemical Properties
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NOT KNOWN
Appearance and Odor:CLEAR LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
NOT KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF CARBON MONOXIDE AND
CARBON DIOXIDE.
Conditions to Avoid Polymerization:HEAT, SUNLIGHT.
Disposal
Waste Disposal Methods:DISPOSE OR RESIN BY COMBINING IT W/LR WHITE
ACCELERATOR (CAT #17413) IN WELL VENTILATED CNTNR, SUCH AS A
BUCKET. RESIN WILL CURE W/LITTLE FUMING. PLACE IT IN FUME HOOD OR
OUTSIDE UNTIL COMPLETE. THE C OOL RESIN IS HARMLESS & MAYBE
DISPOSED OF (SUPDAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.